Fully welding the various parts of the closing panel after tack welding them into position.
Plug welding where the original spot welds were drilled out. The last piece of the closing panel was finally trimmed to size and checked for alignment.
The last repair panel (the black one in the above picture) was cleaned up, correctly aligned and tack welded into it's final position.
It's was then fully welded, completing the welding from the underside.
I think you explain the whole situation very well.I have no point to raise in against of what you have said.
ReplyDeleteChris Gilman Medford Oregon
Thanks, and congratulations on being the first person to comment on my build (over 300 page views currently)
ReplyDelete