Then on to all the rest, one by one. They were each carefully positioned and clamped in place before being welded.
The welds were then cleaned up...
...and a coat of primer sprayed on.
Sunday 17 June 2012
Welding in the cover tabs
Well, over the week I managed to get a new supply of mig wire, although my gas bottle is now running very low! Despite this I thought I'd try and get the cover tabs welded in place. As I'd already started with the first one I just continued plug welding it.
Then on to all the rest, one by one. They were each carefully positioned and clamped in place before being welded.
The welds were then cleaned up...
...and a coat of primer sprayed on.
`
Then on to all the rest, one by one. They were each carefully positioned and clamped in place before being welded.
The welds were then cleaned up...
...and a coat of primer sprayed on.
No comments:
Post a Comment